Question 1

How does the greenXform liquid heating system work?

Accepted Answer

greenXform is an innovative unit that works on an inductive principle, without conventional resistance elements or high-pressure steam boilers that carry an explosion risk. It creates a safe magnetic field that transfers heat to the fluid, heating it with high accuracy.

Question 2

What are its advantages over other heating systems (resistance and steam)?

Accepted Answer

greenXform’s biggest advantage is that it works without resistance elements and without steam: No resistance elements: eliminates limescale, hard deposits and burnt or blown heating elements entirely. Steam-free, pressure-free operation: removes the explosion risk, flue heat losses and the cost of employing a certified boiler operator that high-pressure steam boilers bring.

Question 3

Is it harmful to the environment?

Accepted Answer

No. greenXform runs entirely on electricity. As it burns no fossil fuel such as coal, natural gas or diesel, it produces no flue gas, smoke, ash, waste or toxic emissions at the point of use. It is a fully green technology that can be installed without a flue.

Question 4

Is it harmful to human health? Is there any risk of electric leakage or explosion?

Accepted Answer

No. greenXform is designed to be completely safe for people. Its outer body does not heat up during operation (cold-touch housing). It carries no risk of electric leakage, flame, toxic gas emission or explosion.

Question 5

Does the unit make noise or vibrate while running?

Accepted Answer

There is no compressor or shaking mechanical part inside the unit, so it does not vibrate. The only sound during operation comes from the internal coil cooling fans and the circulation pump; it is about as loud as a refrigerator.

Question 6

What is the capacity of the residential model and how large an area does it heat?

Accepted Answer

The GXF 7-T runs on a 220 V supply, delivers 7 kW and heats up to 450 m², depending on how well the building is insulated. No separate three-phase line is needed.

Question 7

Do the residential models need a separate cylinder or external pump for hot water?

Accepted Answer

No, they do not. The residential package includes as standard an internal circulation pump with an 8 meter pump head, an integrated plate heat exchanger that produces instant domestic hot water, and a wireless portable room thermostat. It works plug-and-play, with no separate tank or cylinder.

Question 8

What capacities are the industrial models produced in?

Accepted Answer

We manufacture units in 16 kW, 32 kW, 64 kW, 120 kW and 240 kW power classes. Where a plant needs more, we connect units in parallel using the cascade method and scale capacity to the requirement.

Question 9

What is the cascade (parallel) architecture for?

Accepted Answer

Our industrial units can be connected in cascade, scaling heating capacity to megawatt level without loss. Thanks to this structure, even if one unit is taken out for service the others keep running and production does not stop.

Question 10

Which liquids can industrial units heat, and to what temperatures?

Accepted Answer

Our units heat different fluids directly, according to the process: Water and caustic wash water: up to 90–95 °C without risking evaporation, Vegetable food oils: directly to 270–275 °C with no intermediate steam circuit, Thermal oils: up to 400 °C for high-temperature processes. A corrosion-resistant 316 grade stainless steel option is also available for hatchery and seawater heating.

Question 11

Does the unit build up limescale? What happens if it runs dry?

Accepted Answer

There are no incandescent high-temperature resistance surfaces in the unit, so no limescale or hard deposits form. If the water supply is cut or flow stops, automatic dry-run and over-temperature protection engages and shuts the unit down safely.

Question 12

What does maintenance cost, and is periodic maintenance required?

Accepted Answer

greenXform requires no periodic maintenance. There is no moving mechanical part to wear out, no burner and no resistance element that can clog with limescale and fail. It needs no flue or boiler cleaning. Keeping the external ventilation channels clean from time to time is enough.

Question 13

How long does installation take, and who carries it out?

Accepted Answer

Installation depends on the model type: Residential models: plug-and-play; a local plumber makes the water and electrical connections and the unit is commissioned the same day. Industrial models: engineered and installed around the plant’s flow, valve and electrical infrastructure requirements, then delivered quickly. Where higher capacity is needed, a cascade connection is used.

Frequently Asked Questions

Get a quote for your needs

{{ t.faq.title }}

{{ t.about.ctaTitle }}